日本KYORITSU共立理化学 PACKTEST 水质检测分析仪
日本KYORITSU共立理化学代理
日本KYORITSU共立理化学官网
欢迎访问日本KYORITSU共立理化学官网或者咨询我们获取更多产品信息。
货期：2-3周
PACKTEST is the most simplified analysis instrument for water quality check. Most of the PACKTEST utilize absorptiometry from corresponding Japanese official method (i.e. JIS K 0102) for its reaction principle.
In other cases, like there is no absorptiometry set under the official method, meaning that there is no ideal reagent available with high sensitivity and selectivity of objective substance, so we came up with our own ingenuity utilizing to add masking and other technique.
- When the PACKTEST uses the same principle as the official method, the interference from co-existing substances will be similar. Removing the interference by utilizing the pre-treatment under JIS, may be necessary prior to the measurement.
PACKTEST是最简单的水质检测分析仪器。PACKTEST的反应原理大多采用日本官方方法(即JIS K 0102)的吸收法。
在其他情况下，就像在官方的方法下没有吸收法，这意味着没有理想的试剂可以获得高灵敏度和选择性的客观物质，所以我们想出了我们自己的聪明才智，利用添加掩蔽和其他技术。
- 当PACKTEST使用与官方方法相同的原理时，来自共存物质的干扰将是相似的。利用JIS下的预处理消除干扰，在测量之前可能是必要的.
How to Use
* Depending on the Analyte, you will need to use enclosed additional reagent for pre-treatment procedure. *
Testing Items
| Testing Item | Model | Range | Reaction Time | |
| Ag | Silver | WAK-Ag | 0, 0.5, 1, 2, ≥5 mg/L | 3 min. |
| Al | Aluminum | WAK-Al | 0, 0.05, 0.1, 0.2, 0.5, 1 mg/L | 1 min. |
| Au | Gold | WAK-Au | 0, 2, 5, 10, 20 mg/L | 30 sec. |
| B(C) | Boron (High Range) | WAK-B(C) | 0, 5, 10, 20, 50, 100 mg/L | 10 min. |
| B | Boron | WAK-B | 0, 0.5, 1, 2, 5, 10 mg/L | 30 min. |
| Cblt | Cobalt | WAK-Cblt | 0, 0.5, 1, 2, 5, ≥10 mg/L | 3 min. |
| Cl(300) | Chloride (300) | WAK-Cl(300) | ≤200, about 250, ≥300 mg/L | 10 sec. |
| Cl(200) | Chloride (200) | WAK-Cl(200) | ≤100, about 150, ≥200 mg/L | 10 sec. |
| Cl(D) | Chloride (Low Range) | WAK-Cl(D) | 0, 2, 5, 10, 20, ≥50 mg/L | 1 min. |
| ClO(C) | Residual Chlorine (High Range) | WAK-ClO(C) | 5, 10, 20, 30, 50, 100, 150, 200, 300, 600, ≥1000 mg/L | 10 sec. |
| ClO·DP | Residual Chlorine (Free) | WAK-ClO·DP | 0.1, 0.2, 0.4, 1, 2, 5 mg/L | 10 sec. |
| T·ClO | Total Residual Chlorine | WAK-T·ClO | 0.1, 0.2, 0.4, 1, 2, 5 mg/L | 2 min. |
| ClO2 | Chlorine Dioxide | WAK-ClO2 | 0.2, 0.4, 0.6, 1, 2, 5, 10 mg/L | 10 sec. |
| NaClO2 | Sodium Chlorite | WAK-NaClO2 | 5, 10, 20, 50, 100, 150, 200, 300, 500, ≥1000 mg/L | 10 sec. |
| NaClO2(D) | Sodium Chlorite (Low Range) | WAK-NaClO2(D) | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
| CN-2 | Free Cyanide | WAK-CN-2 | ≤0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 8 min. |
| COD(H) | COD (High Range) | WAK-COD(H) | 0, 30, 60, 120, 200, ≥250 mg/L | 5 min. |
| COD | COD | WAK-COD | 0, 5, 10, 13, 20, 50, 100 mg/L | 5 min. |
| COD(D) | COD (Low Range) | WAK-COD(D) | 0, 2, 4, 6, ≥8 mg/L | 5 min. |
| Cr6+ | Chromium (Hexavalent) | WAK-Cr6+ | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 2 min. |
| Cr·T | Total Chromium | WAK-Cr·T | 0.5, 1, 2, 5, 10, 20 mg/L | 5.5 min. |
| CS | Cationic Surfactants | WAK-CS | 0, 5, 10, 20, ≥50 mg/L | 5 min. |
| Cu | Copper | WAK-Cu | 0.5, 1, 2, 3, 5, ≥10 mg/L | 1 min. |
| CuM | Copper (DDTC) | WAK-CuM | 0.5, 1, 3, 5, 10 mg/L | 2 min. |
| F | Fluoride (Free) | WAK-F | 0, 0.4, 0.8, 1.5, 3, ≥8 mg/L | 10 min. |
| Fe | Iron | WAK-Fe | 0.2, 0.5, 1, 2, 5, 10 mg/L | 2 min. |
| Fe(D) | Iron (Low Range) | WAK-Fe(D) | 0.05, 0.1, 0.3, 0.5, 1, 2 mg/L | 2 min. |
| Fe2+ | Iron (Divalent) | WAK-Fe2+ | 0.2, 0.5, 1, 2, 5, 10 mg/L | 30 sec. |
| Fe2+(D) | Iron (Divalent) (Low Range) | WAK-Fe2+(D) | 0.1, 0.2, 0.5, 0.8, 1.2, 2.5 mg/L | 30 sec. |
| Fe3+ | Iron (Trivalent) | WAK-Fe3+ | 2, 5, 10, 20, 50, 100 mg/L | 30 sec. |
| FOR | Formaldehyde | WAK-FOR | 0, 0.1, 0.2, 0.3, 0.5, 1, 2 mg/L | 4 min. |
| GLU | Glucose | WAK-GLU | 0, 0.1, 0.2, 0.5, 1, 2mg/100mL
0, 1, 2, 5, 10, 20 mg/L |
10 min. |
| H2O2(C) |
Hydrogen Peroxide (High Range)
|
WAK-H2O2(C) | 3, 7, 13, 20, 35, 70, 100, 130, 200, 400, 700 mg/L | 20 sec. |
| H2O2 | Hydrogen Peroxide | WAK-H2O2 | 0.05, 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
| HYD | Hydrazine | WAK-HYD | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 10 min. |
| MAL | M-Alikalinity | WAK-MAL | 0, 20, 30, 40, 50, 60, 80, ≥100 CaCo3 mg/L | 20 sec. |
| Me | Metals (Cu, Zn, Mn, Ni, Cd) | WAK-Me | 0, 0.2, 0.5, 1, 2, ≥5 mg/L | 1 min. |
| Mg | Magnesium | WAK-Mg | 0, 1, 2, 5, 10, 20 mg/L | 1 min. |
| Magnesium Hardness | 0, 4.1, 8.2, 20.5, 41, 82 mg/L | |||
| Mn | Manganese | WAK-Mn | 0.5, 1, 2, 5, 10, 20 mg/L | 30 sec. |
| Mo | Molybdenum | WAK-Mo | 5, 10, 20, 50, 100, 200, 500 mg/L | 1 min. |
| NH4(C) | Ammonium (High Range) | WAK-NH4(C) | 0, 0.5, 1, 2, 5, 10, ≥20 mg/L | 10 min. |
| Ammonium-Nitrogen (High Range) | 0, 0.5, 1, 2, 5, 10, ≥20 mg/L | |||
| NH4 | Ammonium | WAK-NH4 | 0.2, 0.5, 1, 2, 5, 10 mg/L | 5 min. |
| Ammonium-Nitrogen | 0.2, 0.5, 1, 2, 5, 10 mg/L | |||
| Ni | Nickel | WAK-Ni | 0.5, 1, 2, 5, 10 mg/L | 2 min. |
| Ni(D) | Nickel (DPM) | WAK-Ni(D) | 0.3, 0.5, 1, 2, 5, 10 mg/L | 2 min. |
| NO2(C) | Nitrite (High Range) | WAK-NO2(C) | 16, 33, 66, 160, 330, ≥660 mg/L | 5 min. |
| Nitrite-Nitrogen (High Range) | 5, 10, 20, 50, 100, ≥200 mg/L | |||
| NO2 | Nitrite | WAK-NO2 | 0.02, 0.05, 0.1, 0.2, 0.5, 1 mg/L | 2 min. |
| Nitrite-Nitrogen | 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5 mg/L | |||
| NO3(C) | Nitrate (High Range) | WAK-NO3(C) | 90, 225, 450, 900, 2250, 4500 mg/L | 5 min. |
| Nitrate-Nitrogen (High Range) | 20, 50, 100, 200, 500, 1000 mg/L | |||
| NO3 | Nitrate | WAK-NO3 | 1, 2, 5, 10, 20, 45 mg/L | 3 min. |
| Nitrate-Nitrogen | 0.2, 0.5, 1, 2, 5, 10 mg/L | |||
| O3 | Ozone | WAK-O3 | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
| Pd | Palladium | WAK-Pd | 1, 2, 5, 10, 20, 30, 50 mg/L | 1 min. |
| pH | pH | WAK-pH | pH 5.0 － 9.5 0.5 increment 10 step | 20 sec. |
| TBL | pH-TBL | WAK-TBL | pH 1.6 － 3.4 0.2 increment 10 step | 20 sec. |
| BCG | pH-BCG | WAK-BCG | pH 3.6 － 6.2 0.2 increment 14 step | 20 sec. |
| BTB | pH-BTB | WAK-BTB | pH 5.8 － ≥8.0 0.2 increment 12 step | 20 sec. |
| PR | pH-PR | WAK-PR | pH ≤6.2 – ≥8.8 12step | 20 sec. |
| TBH | pH-TBH | WAK-TBH | pH 8.2 － 9.6 0.2 increment 7 step | 20 sec. |
| ANC | pH-Anthocyanin | ZAK-ANC * | pH 2 － 13 1 increment 12 step | 1 min. |
| PNL | Phenol | WAK-PNL | 0, 0.2, 0.5, 1, 2, 5, 10 mg/L | 8 min. |
| PO4(C) | Phosphate (High Range) | WAK-PO4(C) | 2, 5, 10, 20, 50, 100 mg/L | 1 min. |
|
Phosphate-Phosphorus (High Range)
|
0.66, 1.65, 3.3, 6.6, 16.5, 33 mg/L | |||
| PO4 | Phosphate | WAK-PO4 | 0.2, 0.5, 1, 2, 5, 10 mg/L | 1 min. |
| Phosphate-Phosphorus | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | |||
| PO4(D) | Phosphate (Low Range) | WAK-PO4(D) | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 5 min. |
|
Phosphate-Phosphorus (Low Range)
|
0.02, 0.05, 0.1, 0.2, 0.5, 1 mg/L | |||
| PP | Polyphenol | ZAK-PP * | 0.2, 0.5, 1, 1.5, 2 mg/100mL | 3 min. |
| RC | Tannin in Green Tea | ZAK-RC * | 1, 2, 5, 10, ≥20 mg/100mL | 1 min. |
| S | Sulfide (Hydrogen Sulfide) | WAK-S | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 3 min. |
| SiO2 | Silica | WAK-SiO2 | 5, 10, 20, 50, 100, 200 mg/L | 6.5 min. |
| SiO2(D) | Silica (Low Range) | WAK-SiO2(D) | 0.5, 1, 2, 5, 10, 20 mg/L | 6.5 min. |
| SO3(C) | Sulfite (High Range) | WAK-SO3(C) | 50, 100, 200, 500, 1000, 2000 mg/L | 10 sec. |
| SO4(C) | Sulfate (High Range) | WAK-SO4(C) | 50, 100, 200, 500, 1000, ≥2000 mg/L | 10 sec. |
| TH | Total Hardness | WAK-TH | 0, 10, 20, 50, 100, 200 mg/L | 30 sec. |
| TN·i | Total Nitrogen (Inorganic) | WAK-TN·i | 0, 5, 10, 25, 50, 100 mg/L | 20 min. |
| VC-2 | Vitamin C | WAK-VC-2 | 0.1, 0.2, 0.5, 1, 2, ≥4 mg/100mL | 3 min. |
| L-Ascorbic Acid | 1, 2, 5, 10, 20, ≥40 mg/L | |||
| Zn | Zinc | WAK-Zn | 0, 0.2, 0.5, 1, 2, ≥5 mg/L | 1 min. |
| Zn(D) | Zinc (Low Range) | WAK-Zn(D) | 0, 0.05, 0.1, 0.2, 0.5, 1, ≥2 mg/L | 6 min. |
* Model code starting ZAK- only available in 10 Test Package.
Pretreatment Reagent
| Product Name | Model | Quantity (pcs./box) | Note |
| Pretreatment Reagent
for Total Chromium |
Cr-RA | about 100 tests | Required to measure Total Chromium using PACKTEST Chromium (Hexavalent). |
| Pretreatment Reagent
for Nitrate |
NO3-RA | 50 tests | Required when Nitrite co-exists in the sample while using PACKTEST Nitrate for measurement. |
| Diluted Sulfuric Acid | WAS-D-SO4 | 20mL | To neutralize the sample when necessary, and for acid treatment upon measuring the metal ions. |