The plate was developed at the MRC Laboratory of Molecular Biology (Cambridge, United Kingdom) in collaboration with Dr. Jan Löwe and colleagues. It is a result of many years of experience in successful robotic high-throughput crystallization and combines many of the features not earlier available to the crystallographer.

The new MRC Under Oil 96 Well Crystallization Plate is designed for microbatch crystallization using paraffin, silicon oil, or a mixture of the two. Following the initial experiment, evaporation of the drop through the oil allows for second crystallization stage, enabling further crystal growth as a consequence of concentration. This is different from other experiments in that the conditions are then extreme in nature and permit new conditions to arise.

The new MRC Under Oil 96 Well Crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and microliter optimization alike. Made from an optically superior polymer and with a new design of the wells, the plate allows easy crystal viewing and retrieval.

The advantages of the new MRC Under Oil 96 Well Crystallization Plate.

Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy.

Easy Viewing
The wells are wide conical and have a polished surface on both sides important for perfect illumination. The micro numbering ensures that you will never get lost again (visible by microscope). The optically superior polymer is even UV transmissible and may be used to differentiate between salt and crystals.

Better Sealing
Wide partition walls between the wells give plenty of area for good sealing with tape for the initial experiments of microbatch. No central bending occurs in this very robust structure.

Recommended Volumes
Typical volumes validated for these plates are 20 µl of oil with a shot through sample delivery of 100 nanoliter to 4 microliter.

SBS Standard
The plates are designed to the 96 well SBS standard for all common holders and external numbering (A – H, 1 – 12) with corner location that make the plate easy to use in a robotic sampler. The plate can also be centrifuged for better results. The unique MRC Under Oil 96 well Crystallization plate offers a new way of microbatch crystallography. The 96 wells are optically perfect, designed to observe crystals under a microscope.

Unique Polymer
The proprietary polymer is optically perfect – ultra low binding and guaranteed to have central drop location in the well. There are no static effects and thus micro-droplet jumping is avoided.

描述
MRC Under Oil 96 孔结晶板专为微批次结晶而设计。该板是在 MRC 分子生物学实验室（英国剑桥）与 Jan Löwe 博士及其同事合作开发的。它是在成功的机器人高通量结晶方面多年经验的结晶，并结合了晶体学家早期无法获得的许多功能。

新型 MRC Under Oil 96 孔结晶板设计用于使用石蜡、硅油或两者的混合物进行微批次结晶。在最初的实验之后，液滴通过油的蒸发允许第二个结晶阶段，使由于浓度的结果进一步晶体生长。这与其他实验的不同之处在于，条件在本质上是极端的，并允许出现新的条件。

新的 MRC Under Oil 96 孔结晶板具有独特的特性，使其成为纳升结晶筛选和微升优化等的理想选择。该板由光学优异的聚合物制成，并采用新的孔设计，可以轻松查看和检索晶体。

新型 MRC Under Oil 96 井结晶板的优点。

轻松取回水晶
凸起的宽井使水晶安装特别容易。

轻松查看
井是宽圆锥形，两侧都有抛光表面，这对于完美的照明很重要。微编号确保您永远不会再次迷路（显微镜可见）。光学优异的聚合物甚至可透过紫外线，可用于区分盐和晶体。

更好的密封
孔之间的宽隔墙为微批次的初始实验提供了足够的区域，可使用胶带进行良好的密封。在这种非常坚固的结构中不会发生中心弯曲。

推荐卷
为这些板验证的典型体积是 20 µl 油，一次通过 100 纳升至 4 微升的样品输送。

SBS标准
这些板根据 96 孔 SBS 标准设计，适用于所有常见支架和外部编号（A – H，1 – 12），带有角位置，使该板易于在机器人采样器中使用。该板也可以离心以获得更好的结果。独特的 MRC Under Oil 96 孔结晶板提供了一种新的微批次结晶学方法。 96 个孔在光学上是完美的，设计用于在显微镜下观察晶体。

独特的聚合物
专有聚合物在光学上是完美的 – 超低结合并保证在孔中具有中心液滴位置。没有静电效应，因此避免了微滴跳跃。

 MRC 96 Well Under Oil Plate (HR3-102/HR3-104) Description MRC 96 Well Under Oil Plate (HR3-102/HR3-104) Drawing