The SWISSCI UVXPO 3 Lens Crystallisation Plate is made from a new polymer mixture that means crystals can be viewed in UV, Polar and Visible light. UVXPO is short for UV compatible as well as excellent uniform (zero) background when using cross polarised light.

The SWISSCI 3 Lens Crystallisation Plate is an ideal product for protein crystallisation presented in a 96-well plate format.

The Advantages of the 3 Lens Crystallization Plate

Easy crystal retrieval
Raised wide wells make the crystal mounting especially easy.

Easy viewing
Crystals can be viewed in UV, Polar and Visible light.
Uniform (zero) background when using cross polarised light.
The wells are a wide conical shape and have a lens effect for perfect illumination.
The micro-numbering ensures you will never get lost again (visible by microscope).
The optically superior polymer is UV transmissible and may be used to differentiate between salt and protein crystals.

Better sealing
Wide partition walls between the wells give plenty of area for good sealing with tape.
No central bending occurs in this very robust structure.
Excellent long term storage – no sample evaporation.

Wide range of volumes
Typical volumes are 20-40 µl of reservoir and 50 nl-5 µl drop size. The 288 optical wells offer three times the number of experimental constructions.

ANSI/SLAS 1-2004 Standard
The plates are designed to the 96-well ANSI/SLAS 1-2004 standard for all common holders and external numbering (A-H, 1-12) with corner location make the plate easy to use in a robotic sampler.
The 3 Lens plate is suitable for centrifugation.
The unique 3 drop protein crystallisation plate offers a new way of sitting-drop crystallography.
The 288 wells are optically perfect designed to observe crystals under a microscope.

3 Lens plate features
Easy to fill 96-lens structure – typically 30 microlitres per buffer lens.
Standard ANSI/SLAS 1-2004 Standard form for automation.
Optically perfect wells with lens effect for a better view with microscope.
Microscopic identifier within wells, simplifying the orientation under the microscope.
Maximum volume of the buffer reservoir is 40 microlitres, typically 10 nanolitres is used for the protein well filling.
Grown crystals are easy to identify and to remove from lens due to a low-binding polymer.
Plate with 3 lenses for each sample, better growing security with triplicates or the ability to use lens two and lens threeas mixing stations.
Lenses fill without micro-droplets jumping out due to static effects.
Wells can be individually sealed with a perfectly flat upper surface – there is a large land area designed to ensureintegrity of each lens section.
The profile allows for easier storage.
Low volume buffer well enables savings on reagents.
Triplicates allow for 288 constructs per plate.

描述
SWISSCI 3 透镜结晶板是一种理想的蛋白质结晶产品，以 96 孔板形式呈现。

SWISSCI UVXPO 3 镜片结晶板由新型聚合物混合物制成，这意味着可以在紫外线、极光和可见光下观察晶体。 UVXPO 是 UV 兼容以及使用交叉偏振光时出色的均匀（零）背景的缩写。

SWISSCI 3 Lens 结晶板是一种理想的蛋白质结晶产品，采用 96 孔板形式。

3镜片结晶板的优点

轻松取回水晶
凸起的宽井使水晶安装特别容易。

轻松查看
可以在紫外光、极光和可见光下观察晶体。
使用交叉偏振光时的均匀（零）背景。
井是宽圆锥形，并具有完美照明的透镜效果。
微编号确保您再也不会迷路（显微镜可见）。
光学优异的聚合物可透过紫外线，可用于区分盐和蛋白质晶体。

更好的密封
孔之间的宽隔墙提供了足够的区域，以便用胶带进行良好的密封。
在这种非常坚固的结构中不会发生中心弯曲。
出色的长期储存 – 无样品蒸发。

范围广
典型的体积是 20-40 µl 的水库和 50 nl-5 µl 的液滴大小。 288 个光井提供了三倍于实验结构的数量。

ANSI/SLAS 1-2004 标准
这些板的设计符合 96 孔 ANSI/SLAS 1-2004 标准，适用于所有常见支架，外部编号（A-H、1-12）带有角位置，使板易于在机器人采样器中使用。
3 透镜板适用于离心。
独特的 3 滴蛋白质结晶板提供了一种新的坐滴结晶学方法。
288 个孔的光学设计非常完美，可用于在显微镜下观察晶体。

3 透镜板特性
易于填充的 96 透镜结构 – 每个缓冲透镜通常为 30 微升。
标准 ANSI/SLAS 1-2004 自动化标准形式。
具有镜头效果的光学完美孔，可在显微镜下获得更好的视野。
孔内的显微标识符，简化了显微镜下的定位。
缓冲液储存器的最大体积为 40 微升，通常 10 纳升用于蛋白质孔填充。
由于低结合聚合物，生长的晶体很容易识别和从镜片上去除。
每个样品带有 3 个镜片的板，通过三次重复提高安全性或使用镜片二和镜片三作为混合站的能力。
镜头填充时不会因静电效果而跳出微滴。
孔可以用完全平坦的上表面单独密封 – 大面积的土地面积旨在确保每个镜头部分的完整性。
配置文件允许更容易的存储。
低容量缓冲液井可节省试剂。
一式三份允许每板 288 个构建体。

 

 Swissci 3 Well Midi UVXPO (HR3-193/HR3-194) Plate Drawing